FLANGE & PIPE ALIGNMENT KIT – HYDRAULIC
Flange alignment tools are developed to rectify twist and rotational misalignment without additional stress in pipelines. Hydraulic cylinders, jacks, and lifting wedges can also be used to assist in positioning and aligning. These hydraulic tools can be used to align or re-align flange joints during pipework construction, commissioning or during routine maintenance. The tool is attached to the flange joint where misalignment is at its greatest and then simply push and pull the flanges into correct alignment. Produces a maximum alignment force of 90kN when the maximum hydraulic pressure of 700 Bar (10,000 psi) is applied by the hydraulic hand pump.
- Kit comprising of alignment head, hydraulic pump and hose
- Removes the requirement for rigging and anchor points used in traditional methods
- The correct tool for large and medium sized flange joints
Specifications
| Power | Hydraulic |
|---|---|
| Min Bolt Hole Diameter | 35.5mm |
| Max Wing Reach | 235mm |
| Max Drop Reach | 200mm |
| Max Alignment | 85mm |
| Max Alignment Force | 90kN (20,227 ft.lb) |
| Hydraulic Pump | 700 bar (10,000 psi) |
| Hydraulic Hose | 2.1m |
| Dimensions (tool | kit case) | 100 x 230 x 540mm | 920 x 510 x 210mm |
| Weight (tool | full kit) | 14.5 | 26kg |
| Product Code | 067980 |
*Information should be used as a guide only. Equipment may vary from images shown.
Have a question? Get in touch today, call us on 01325 609040 or head over to our contact page
Contact Us