FIXING TESTER – HYDRAULIC
A range of fixing testers, used by engineers to confirm the holding power of anchors in most construction materials, either for the purpose of establishing safe working loads or to validate the correct installation of existing fixings. The tensile load of up to 50kN is applied to the fixing mechanically and hydraulics are used to register the load through the analogue gauge. A variety of adaptors enable a wide range of fixing sizes to be tested.
- Tests the pull out strength of construction fixings
- Tests loads up to 50kN
- Various adaptors available
Specifications
| Size | Medium Duty |
|---|---|
| Model | Hydrajaws 2050 |
| Stroke | 0 – 50mm |
| Load Gauge (analogue) | 0 – 50kN |
| Load Gauge (digital) | 0 – 50kN |
| Slot adaptors | 4.5, 5.5, 6.5, 8.5, 10.5, 12.5mm |
| Threaded Button Adaptors | M10, M12 |
| Threaded Stud Adaptors | M16, M20, M24 |
| Rebar Adaptors | - |
| Case Dimensions | 550 x 400 x 140mm |
| Weight | 2.5kg |
| Product Code | 077940 |
*Information should be used as a guide only. Equipment may vary from images shown.
Have a question? Get in touch today, call us on 01325 609040 or head over to our contact page
Contact Us