TORQUE MULTIPLIER (SQUARE DRIVE) – MANUAL
A precision tool, designed for use where it is necessary to provide higher torques than would otherwise be possible due to limitations of space or operator strength. Input to the multiplier is via a ratchet torque wrench set to one fifth of the desired output torque. It multiplies the input torque by a factor of 5 when used with the supplied straight reaction, or 4.75 when used with the supplied cranked reaction.
- For use with ratchet torque wrenches
- Controlled screw tightening from 130 to 2700 Nm
- Actuation accuracy: ±4%
- Not suitable for use with Impact Wrenches
Specifications
| Model | 1300 | 2700 |
|---|---|---|
| Range | 130 – 1300 Nm | 270 – 2700 Nm |
| Multiplication Ratio (with cranked | straight reaction) | 4.75:1 | 5:1 | 4.75:1 | 5:1 |
| Maximum Input (with cranked | straight reaction) | 274 | 260 Nm | 568 | 540 Nm |
| Velocity Ratio | 5.333:1 | 5.333:1 |
| Accuracy | ±4% | ±4% |
| Drive Input | ½" Square | ¾" Square |
| Drive Output | ¾" Square | 1" Square |
| Weight | 3.8kg | 4.5kg |
| Product Code | 072010 | 072011 |
*Information should be used as a guide only. Equipment may vary from images shown.
Have a question? Get in touch today, call us on 01325 609040 or head over to our contact page
Contact Us